Can Anti-Aufbau DFT Calculations Estimate Singlet Excited State Aromaticity? Correspondence on “Dibenzoarsepins: Planarization of 8π-Electron System in the Lowest Singlet Excited State”

The simple anti-aufbau DFT approach for estimating singlet excited state aromaticity suggested in a recent Communication published in this journal is shown to produce incorrect results because it targets a linear combination of the singlet and triplet configurations involving the HOMO and LUMO rather than the first singlet excited state. If the S₁ state of a molecule is dominated by the HOMO→LUMO excitation, a comparably simple but theoretically consistent and qualitatively correct approximation to the S₁ wavefunction can be achieved by performing a small “two electrons in two orbitals” CASSCF(2,2) calculation which can be followed by the evaluation of magnetic aromaticity criteria such as NICS.     

Integrating Time-Resolved Imaging Information by Single-Luminophore Dual Thermally Activated Delayed Fluorescence

The fact that the lifetime of photoluminescence is often difficult to access because of the weakness of the emission signals, seriously limits the possibility to gain local bioimaging information in time-resolved luminescence probing. We aim to provide a solution to this problem by creating a general photophysical strategy based on the use of molecular probes designed for single-luminophore dual thermally activated delayed fluorescence (TADF). The structural and conformational design makes the dual TADF strong in both diluted solution and in an aggregated state, thereby reducing sensitivity to oxygen quenching and enabling a unique dual-channel time-resolved imaging capability. As the two TADF signals show mutual complementarity during probing, a dual-channel means that lifetime mapping is established to reduce the time-resolved imaging distortion by 30–40 %. Consequently, the leading intracellular local imaging information is serialized and integrated, which allows comparison to any single time-resolved signal, and leads to a significant improvement of the probing capacity.     

Poly(2‐oxazoline) Hydrogels: State‐of‐the‐Art and Emerging Applications

The synthesis of poly(2‐oxazoline)s has been known since the 1960s. In the last two decades, they have risen in popularity thanks to improvements in their synthesis and the realization of their potential in the biomedical field due to their “stealth” properties, stimuli responsiveness, and tailorable properties. Even though the bulk of the research to date has been on linear forms of the polymer, they are also of interest for creating network structures due to the relatively easy introduction of reactive functional groups during synthesis that can be cross‐linked under a variety of conditions. This opinion article briefly reviews the history of poly(2‐oxazoline)s and examines the in vivo data on soluble poly(2‐oxazoline)s to date in an effort to predict how hydrogels may perform as implantable materials. This is followed by an overview of the most recent hydrogel synthesis methods and emerging applications, and is concluded with a section on the future directions predicted for these fascinating yet underutilized polymers.     

Synthesis of new environmentally friendly poly(urethane-imide)s as an adsorbent including β-cyclodextrin cavities and attached to iron nanoparticles for removal of gram-positive and gram-negative bacteria from water samples

The presence of pathogenic bacteria in water is one of the important health concerns in the world. Herein, we report a new high-performance environmentally friendly poly (urethane-imide) (PUIm) containing β-cyclodextrin (β-CD) in its backbone to adsorb bacteria from water samples with significant heat resistance. New PUIm was prepared by bonding a diisocyanate as a new cross linking agent to β-CD and magnetic nanoparticles (MNPs). The effects of concentrations of bare polymer and polymer bounded to iron nanoparticles and contact times on the adsorption of staphylococcus aureus and Escherichia coli were considered at physiological pH. The adsorption capacity of this polymer is increased by binding it to MNPs and in addition it is possible to separate the polymer from aqueous sample with external magnetic field. A filter was also provided from polymer attached to iron nanoparticles and high percentages of bacteria were removed after filtering the real wastewater.     

Extracellular Matrix Proteins Involved in Alzheimer's Disease

Alzheimer's disease (AD) is one of the most common neurodegenerative diseases and characterized by cognitive and memory impairments. Emerging evidence suggests that the extracellular matrix (ECM) in the brain plays an important role in the etiology of AD. It has been detected that the levels of ECM proteins have changed in the brains of AD patients and animal models. Some ECM components, for example, elastin and heparan sulfate proteoglycans, are considered to promote the upregulation of extracellular amyloid-beta (Aβ) proteins. In addition, collagen VI and laminin are shown to have interactions with Aβ peptides, which might lead to the clearance of those peptides. Thus, ECM proteins are involved in both amyloidosis and neuroprotection in the AD process. However, the molecular mechanism of neuronal ECM proteins on the pathophysiology of AD remains elusive. More investigation of ECM proteins with AD pathogenesis is needed, and this may lead to novel therapeutic strategies and biomarkers for AD.     

Trichloro(Dinitrogen)Platinate(II)

Zeise's salt, [PtCl₃(H₂C=CH₂)]⁻_, is the oldest known organometallic complex, featuring ethylene strongly bound to a platinum salt. Many derivatives are known, but none involving dinitrogen, and indeed dinitrogen complexes are unknown for both platinum and palladium. Electrospray ionization mass spectrometry of K₂[PtCl₄] solutions generate strong ions corresponding to [PtCl₃(N₂)]⁻, the identity of which was confirmed through ion-mobility spectrometry and MS/MS experiments that proved it to be distinct from its isobaric counterparts [PtCl₃(C₂H₄)]⁻ and [PtCl₃(CO)]⁻. Computational analysis established a gas-phase platinum–dinitrogen bond strength of 116 kJ mol⁻¹, substantially weaker than the ethylene and carbon monoxide analogues but stronger than for polar solvents such as water, methanol and dimethylformamide, and strong enough that the calculated N−N bond length of 1.119 Å represents weakening to a degree typical of isolated dinitrogen complexes.     

Structural and luminescence characteristics of CuAlxIn1−xSe2 (0 < x ≤ 0.30) chalcopyrite solid solutions

1. Download : Download high-res image (112KB)
2. Download : Download full-size image

     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.